1. Preparation before the test:
Vehicle inspection: Make sure that the electric bicycle is in good condition, including normal tire pressure, flexible brake system, good lubrication of the chain or transmission device, etc. Because the status of these components will affect the vehicle's driving resistance, which will affect the endurance.
Battery charging: Fully charge the battery. Use the original charger when charging, and charge according to the requirements of the manual to ensure that the battery can reach the best charging state. You can judge whether the battery is full by the indicator light of the charger or the dashboard of the electric bicycle.
Record initial data: Record the initial battery power, voltage and other information, as well as the vehicle's odometer reading. These data will serve as the basis for subsequent calculations of endurance.
2. Selection of test environment:
Temperature: Try to choose a moderate temperature environment for testing. Generally speaking, the temperature between 20℃-25℃ is more suitable. Because low temperature will reduce the performance of the battery and shorten the endurance; high temperature may affect the life and safety of the battery.
Road conditions: Choose a flat, dry road with good traffic conditions for testing, and avoid too many uphill, downhill, bumpy sections and traffic congestion. This can reduce the difference in energy consumption caused by road conditions and make the test results closer to the actual range.
Wind speed: Try to choose to test in windless or breezy weather, because strong winds will increase the driving resistance of the vehicle, thereby reducing the range.
3. Test process:
Loading: Load according to the design load standard of the electric bicycle. Sandbags, lead blocks and other heavy objects can be used to simulate the situation of carrying people or goods. If it is a single-person test, the weight of the tester should be as close as possible to the standard load of the electric bicycle.
Driving speed: Maintain a stable driving speed. It is recommended to drive at the economic speed of the electric bicycle. Avoid frequent acceleration, deceleration and sudden braking operations, because these operations will increase energy consumption 3.
Driving distance: Continue driving until the electric bicycle is exhausted or cannot drive normally, and record the mileage at this time. During driving, you can record the battery power, voltage and other data at intervals to analyze the battery discharge.
4. Data calculation and analysis:
Cruise range calculation: Subtract the odometer reading before the test from the final mileage to get the range of the electric bicycle.
Data comparison: Compare the mileage obtained from the test with the mileage claimed by the electric bicycle manufacturer. If the difference is large, there may be problems such as poor battery performance and high vehicle energy consumption. At the same time, analyze the data recorded during the test to find out the factors that affect the range, such as the battery discharge curve and the energy consumption of the motor.
If you want to know more about the range test method of air-cooled electric sports bicycles, please visit www.jesenki.com!
Dec 13, 2024
Endurance test method for air-cooled electric sports bikes
You Might Also Like
Send Message







