+8613912383580
Home / Blog / Details

Sep 27, 2024

How to extend the service life of lead-acid scooters

1. Safety first
Wear protective equipment: When riding a lead-acid scooter, be sure to wear a safety helmet to protect your head from injury. At the same time, you can consider wearing protective equipment such as knee pads and elbow pads to reduce the risk of injury.
Obey traffic rules: Lead-acid scooters are generally regarded as non-motor vehicles and should obey traffic rules when driving on the road. Drive on the right, do not go against the flow, run red lights or drive on motor vehicle lanes. Pay attention to traffic signals and signs, slow down in advance to avoid pedestrians, vehicles and obstacles.
Control the speed: Do not exceed the speed limit, and control the speed reasonably according to the road conditions and your own skills. Generally speaking, the maximum speed of a lead-acid scooter should not exceed 20 kilometers per hour. In places with curves, downhill or complex road conditions, the speed should be further reduced to ensure safety.
Keep a safe distance: Keep a sufficient safe distance from other vehicles and pedestrians to avoid collisions. Especially when overtaking or being overtaken, be careful to keep a lateral distance.
Pay attention to night riding safety: If you ride at night, be sure to turn on the lights of the scooter to improve your visibility. At the same time, wear reflective clothing or reflective accessories to make it easier for other vehicles and pedestrians to find you.
2. Battery use
Correct charging: Use the original charger for charging, and avoid using inferior chargers to avoid damaging the battery or causing safety accidents. When charging, choose a well-ventilated and dry environment, away from flammable materials and heat sources. The charging time should not be too long. Generally, when the charger indicator shows that it is fully charged, the charger should be unplugged in time to avoid overcharging.
Avoid deep discharge: Try to avoid fully discharging the battery. When the remaining power is about 20%, it should be charged in time. Deep discharge will damage the battery and reduce the battery life.
Storage precautions: If the scooter is not used for a long time, the battery should be stored after being fully charged, and charged once every once in a while to keep the battery active. When storing the battery, avoid high temperature, humidity and direct sunlight. It is best to keep the battery in a dry and cool place.
3. Maintenance
Regular inspection: Regularly check the various parts of the scooter, such as brakes, tires, handlebars, pedals, etc., to ensure that they are in good working condition. If any problems are found, they should be repaired or replaced in time.
Cleaning and maintenance: Clean the body of the scooter regularly to remove dust and dirt. You can use a soft damp cloth to wipe the body and avoid using corrosive detergents. For parts such as wheels and chains, you can add lubricating oil appropriately to reduce wear and noise.
Waterproof and moisture-proof: The batteries and electronic components of lead-acid scooters are usually not waterproof, so be careful to avoid rain or water during use. If you accidentally wet the scooter, you should wipe it dry in time and check whether the battery and electronic components are damaged.
In short, the correct use of lead-acid scooters, paying attention to safety, and doing a good job of battery use and maintenance can extend the service life of the scooter and bring more convenience to our travel.
If you are interested in learning about how to extend the life of lead-acid scooters, etc., please contact Jesenki vehicle, our technical team will tailor the most suitable product solution for you.

Send Message